Vaaish Posted June 4, 2003 Report Share Posted June 4, 2003 [quote name='Breunor' date='Jun 4 2003, 12:38 PM']I'd like to check them out, but I can't open max files. Sad but true :crying: . Could you edit the previous post with a zip file containing them in 3ds format when possible? 3ds is the supported format. If you can't and someone else can open and convert them, please contact Vaaish about emailing the files back to him. One of things we don't want is for people to open an artist's model, change it, and resubmit it as a second file, even for this purpose. The only time you should be making changes for something other than your own models is when the artist gives you permission to do so. The artist should then be sent the file to resubmit it as the original attachment, replacing the previous one with a note in the post stating this IMO. As to the list of items gambino, pick whatever you like. Even with the general idea of an item, different artists might design the same thing differently enough that we can say, I like this part of yours, and that part of the other one. What would they look like together?" That type of thing. So pick whatever catches your fancy. [/quote] Unfortunately I don't have MAX installed to convert them. I just rememberd I had them and they hadn't been used for anything since the other project went under a couple of years ago. If anyone can convert the max files be my guest. Very nice model Gambino, only suggestion I have would be to replace the site with a more OICW one. Link to comment Share on other sites More sharing options...
Cubik Posted July 6, 2003 Report Share Posted July 6, 2003 The SOCOM: Link to comment Share on other sites More sharing options...
Cubik Posted July 6, 2003 Report Share Posted July 6, 2003 The polycount for the OICW: 2350 The polycount for the SOCOM: 2593 None of these models are complete, they are just bases which will be further built on. And here is a zipped file containing the .3ds files for the SOCOM and the OICW. Link to comment Share on other sites More sharing options...
Ion Posted July 6, 2003 Report Share Posted July 6, 2003 Cubik!! Nice work there! I like the Rifle! Best Regards / Ion Link to comment Share on other sites More sharing options...
Deimos Posted July 6, 2003 Report Share Posted July 6, 2003 Nice work on the OICW and SOCOM Cubik. Good amount of detail on both. Link to comment Share on other sites More sharing options...
mikker Posted July 7, 2003 Report Share Posted July 7, 2003 'greed. Link to comment Share on other sites More sharing options...
Breunor Posted July 15, 2003 Report Share Posted July 15, 2003 Both those models look really good, I'll get the 3ds files up on the assetlist when I get a chance. Let me know when there are updates or you have the final ones complete. Link to comment Share on other sites More sharing options...
Cubik Posted July 15, 2003 Report Share Posted July 15, 2003 Will do that, Breunor. I have done some more work on the SOCOM, but it isn't different enough to justify another upload. Link to comment Share on other sites More sharing options...
Cubik Posted July 15, 2003 Report Share Posted July 15, 2003 The new things are a couple of indents at the back and front of the gun + some general tweaking: Link to comment Share on other sites More sharing options...
Cubik Posted August 13, 2003 Report Share Posted August 13, 2003 Ok, some more work on the SOCOM. Mostly the additions of more or less correct smoothing groups, and some work on the front of the gun (thanks for the help Kenshiro). Now, the SOCOM totals at 2651 polygons. Should I use the remaining 349 to model the safetycatch and the other levers not feutured on this model? Or is it fine this way and I can use the remaining to add extra detail to the general form? Link to comment Share on other sites More sharing options...
Guest Jim69 Posted August 13, 2003 Report Share Posted August 13, 2003 I don't think u can put anymore detail on that, it's perfect I am gonna assume this is 4 X.Net :: Link to comment Share on other sites More sharing options...
Cubik Posted August 13, 2003 Report Share Posted August 13, 2003 (edited) Heh, it's always nice to hear nice things about your work. But, please, nitpick! I need to know if there's something that needs to be added or edited. Edited August 13, 2003 by Cubik Link to comment Share on other sites More sharing options...
miceless Posted August 13, 2003 Report Share Posted August 13, 2003 Looks good. Cant see anything wrong... Link to comment Share on other sites More sharing options...
Breunor Posted August 13, 2003 Report Share Posted August 13, 2003 The socom looks complete to me. Very nice work Cubik. Does the texture Drewid made for it still fit, or does the mapping need to be tweaked at this point? Link to comment Share on other sites More sharing options...
Cubik Posted August 13, 2003 Report Share Posted August 13, 2003 This is a completly new version of the gun. It doesn't look anything like the old 450 polygon version that drewid textured. So, I think that it should be retextured. Link to comment Share on other sites More sharing options...
Kenshiro Posted August 14, 2003 Report Share Posted August 14, 2003 Can we see it with the slide back (unless you didn't split it out, can't remember from our discussion if you were or were not going to)? Link to comment Share on other sites More sharing options...
miceless Posted August 14, 2003 Report Share Posted August 14, 2003 Is there going to be some texture on the grip? I wasnt sure if that was a later stage or not. Some kind of rough effect on the handle might be nice. Link to comment Share on other sites More sharing options...
Cubik Posted August 14, 2003 Report Share Posted August 14, 2003 Slide: back. Now, there are some things that should be corrected. The pin (or what you call it) is stuck to the slide and the hatch where the brass gets thrown out is also modeled with the slide. It's not hard to fix, I just wonderd if I should bother with it. Are we going to use fully animated models in the Ufopedia, or just rotations? Link to comment Share on other sites More sharing options...
miceless Posted August 14, 2003 Report Share Posted August 14, 2003 Nice grips. Link to comment Share on other sites More sharing options...
Vaaish Posted August 14, 2003 Author Report Share Posted August 14, 2003 [quote name='Cubik' date='Aug 14 2003, 09:38 AM']Slide: back. Now, there are some things that should be corrected. The pin (or what you call it) is stuck to the slide and the hatch where the brass gets thrown out is also modeled with the slide. It's not hard to fix, I just wonderd if I should bother with it. Are we going to use fully animated models in the Ufopedia, or just rotations?[/quote] I believe just rotations. Link to comment Share on other sites More sharing options...
Cubik Posted August 14, 2003 Report Share Posted August 14, 2003 OK, that seems resonable. Then I will start working on the lowpolygon version of the gun. And see I can get a hold off drewid so that he can start creating some new textures. If no-one else feels the call, that is. Link to comment Share on other sites More sharing options...
Kenshiro Posted August 15, 2003 Report Share Posted August 15, 2003 Nice work, Cubik - I think we could even get away with using that in an animation, ejection port or no. Can't wait to see this thing with textures on it. Link to comment Share on other sites More sharing options...
revenant4 Posted August 16, 2003 Report Share Posted August 16, 2003 Love the grips and detail...awesome work... Link to comment Share on other sites More sharing options...
Breunor Posted December 26, 2003 Report Share Posted December 26, 2003 For those new to the area, our current status on these 2 models are: the socom pistol is modeled and textured, the OICW rifle is modeled but not textured. If anybody wants to texture it let me know, you can even post a texture here and we can map it on. Link to comment Share on other sites More sharing options...
Recommended Posts