Vaaish Posted February 1, 2005 Report Share Posted February 1, 2005 Just starting the topic . Link to comment Share on other sites More sharing options...
fux0r666 Posted February 2, 2005 Report Share Posted February 2, 2005 I think that fidel_ has a model for this going. Link to comment Share on other sites More sharing options...
Vaaish Posted February 2, 2005 Author Report Share Posted February 2, 2005 I've not received anything or seen the model posted, if he posts it we can carry on from there if not I can't hold it down especially since he's supposed to be texturing the Grey. Link to comment Share on other sites More sharing options...
red knight Posted February 2, 2005 Report Share Posted February 2, 2005 @eamon: Post the pictures with the attachment facilities at the forum, instead of in the bug tracker stored in an external server. That way we can have the history of the model. You should upload too intermediate dotXSI files in the bug tracker too . @Vaaish: Is it me, or the concept of the raptor is a more stylish (not so big), cause we will have serious dimension problems if the size of the alien is that. I couldnt find it in forums, but I bet I saw the heavy version of that concept as one of the intermediate ideas that had been considered.  Just for documentation purposes, the concept is this one:http://bugs.projectxenocide.com/files/21112681.jpg GreetingsRed Knight Link to comment Share on other sites More sharing options...
Vaaish Posted February 2, 2005 Author Report Share Posted February 2, 2005 RK: I'm not getting what you are saying... if you mean in terms of squares the pose the concept is in kinda spreads him out more than it should. Link to comment Share on other sites More sharing options...
red knight Posted February 2, 2005 Report Share Posted February 2, 2005 (edited) I should have been sleeping already , lets see if this extra comment helps  Yes it looks a little to heavy, and in that pose (resting) it takes way more than 2 squares . And that would be a serious trouble. GreetingsRed Knight Edited February 2, 2005 by red knight Link to comment Share on other sites More sharing options...
Vaaish Posted February 2, 2005 Author Report Share Posted February 2, 2005 (edited) ok, no IIRC it will take up 2 squares long instead of wide to accommodate the tail, and I believe the creature is streched out in that shot. looks more like how it would look attacking or moving than stationary. (it won't be an issue for the attack animations to go outside of the square will it?) Edited February 2, 2005 by Vaaish Link to comment Share on other sites More sharing options...
red knight Posted February 2, 2005 Report Share Posted February 2, 2005 Mhhh I dont think it would be ok, to invade back places... Unless attacking one guy would cause the creature to nock down who is at the back with the tail. GreetingsRed Knight Link to comment Share on other sites More sharing options...
Vaaish Posted February 2, 2005 Author Report Share Posted February 2, 2005 Mhhh I dont think it would be ok, to invade back places... Unless attacking one guy would cause the creature to nock down who is at the back with the tail. GreetingsRed Knight  in order to prevent that we would have to make the creature take up 4 square, eg ++++  instead of  ++ Link to comment Share on other sites More sharing options...
fux0r666 Posted February 2, 2005 Report Share Posted February 2, 2005 (edited) Â This is what the model looks like.. Edited February 2, 2005 by fux0r666 Link to comment Share on other sites More sharing options...
red knight Posted February 2, 2005 Report Share Posted February 2, 2005 (edited) Fux, but where is the model? Upload it here so eamon can continue with it. GreetingsRed Knight Edited February 2, 2005 by red knight Link to comment Share on other sites More sharing options...
Vaaish Posted February 2, 2005 Author Report Share Posted February 2, 2005  This is what the model looks like..  do we have a 3ds or any other portion of the model... or just those shots? if you have the model I need to get it to eamon so he can work on texturing instead of redoing work thats already finished. Link to comment Share on other sites More sharing options...
fux0r666 Posted February 2, 2005 Report Share Posted February 2, 2005 do we have a 3ds or any other portion of the model... or just those shots? if you have the model I need to get it to eamon so he can work on texturing instead of redoing work thats already finished. I assume that the model is on Fidel__'s hdd. You or I or both could ask him for it. Link to comment Share on other sites More sharing options...
Vaaish Posted February 2, 2005 Author Report Share Posted February 2, 2005 I'll see if I can drum it up off him Link to comment Share on other sites More sharing options...
fidel_ Posted February 4, 2005 Report Share Posted February 4, 2005 (edited) Here's the model. Sorry, been busy with lots of stuff lately. edit: it's unfinished of course as the concept thread for it was closed down when I was modeling it.reaver2.rar Edited February 4, 2005 by fidel_ Link to comment Share on other sites More sharing options...
Vaaish Posted February 4, 2005 Author Report Share Posted February 4, 2005 thanks fidel. ok here are shots of the work in progress model the eamon is doing http://lightshift.theblood.net/pictures.html He still doesn't have rights to post in the thread (working on that) Link to comment Share on other sites More sharing options...
eamon Posted February 7, 2005 Report Share Posted February 7, 2005 Well I can post here now (and it was my own fault I couldn't post before now as I came to find out) Anyway the WIP is looking good (but don't take my word for it) It does not have any "real" textures yet and has 1611 polys (once I turn it in to tri-gons). The model "as is" can be found in the bug tracker Issue #104 in 3 formats (.obj .3ds and .ms3d) Please let me know what you think  -Eamonhttp://www.theblood.net/lightshift/pictures/Raptor2.jpg Link to comment Share on other sites More sharing options...
Vaaish Posted February 7, 2005 Author Report Share Posted February 7, 2005 Good, though the legs from the front are still troubling. Thre is something not right with the anatomy with the way they are the same thickness from top to bottom. as a gerneral example, look at how a himan leg is formed, the muscle contours etc, it's not just a tube straight down. The side view is still looking pretty good. Link to comment Share on other sites More sharing options...
eamon Posted February 7, 2005 Report Share Posted February 7, 2005 Good, though the legs from the front are still troubling. Thre is something not right with the anatomy with the way they are the same thickness from top to bottom. as a gerneral example, look at how a himan leg is formed, the muscle contours etc, it's not just a tube straight down. The side view is still looking pretty good. Well here is another stab at it...  http://www.theblood.net/lightshift/pictures/Raptor14.jpg -Eamon Link to comment Share on other sites More sharing options...
fux0r666 Posted February 9, 2005 Report Share Posted February 9, 2005 That's good work, Eamon. The geometry is clean and the model is *very* true to the concept. Vaaish and I were discussing the models and, for better or for worse, we came to the conclusion that we like the configuration of Fidel__'s take on the concept better. It looks more fleet footed and predatory. I was wondering if you would care to work your magic on Fidel__'s model. Fidel__ admits that the geometry isn't as clean as yours, but we do like the shape better. Fidel__ has roughed in some detail but it lacks claws, etc. If you decide to take it up, we like your work in the claws; the optimum outcome would be for you to keep the splayed toes of Fidel__'s monster but to put your claws on them, and to detail up the model as you see fit. Link to comment Share on other sites More sharing options...
eamon Posted February 9, 2005 Report Share Posted February 9, 2005 That's good work, Eamon. The geometry is clean and the model is *very* true to the concept. Vaaish and I were discussing the models and, for better or for worse, we came to the conclusion that we like the configuration of Fidel__'s take on the concept better. It looks more fleet footed and predatory. I was wondering if you would care to work your magic on Fidel__'s model. Fidel__ admits that the geometry isn't as clean as yours, but we do like the shape better. Fidel__ has roughed in some detail but it lacks claws, etc. If you decide to take it up, we like your work in the claws; the optimum outcome would be for you to keep the splayed toes of Fidel__'s monster but to put your claws on them, and to detail up the model as you see fit. hey... no hard feelings I will put my claws into the his feet.  Do you want to keep his two claws in the front one in the back or my three claws in the front one in the back?  Do you want the toes to angle down like in his model or to be above ground level?  I will try to cleen up the geometry and lower the poly count and get back to you. -Eamon Link to comment Share on other sites More sharing options...
fux0r666 Posted February 10, 2005 Report Share Posted February 10, 2005 (edited) The toes angled down Is a relaxed position, I think. Something like this only with those wicked claws yours and J'ordos's would work nicely, I think: http://www.biokids.umich.edu/resources/tanya_dewey/gr_horned_owl_feet.jpg/medium.jpg http://www.backyardnature.net/foot-owl.jpg I think that we should the 3 toed feet (2 in front, one in back), because nothing on earth looks like that. If it ends up not working out, I'll take the blame and alter it  edit: on second thought, the more I look at that owl foot with the recessed toe, the more I like it. Maybe put to toes with claws on front, one for stability on the back, and a recessed one on the outside. Deleting/altering a toe will be easier than adding one. Edited February 10, 2005 by fux0r666 Link to comment Share on other sites More sharing options...
eamon Posted February 10, 2005 Report Share Posted February 10, 2005 That's good work, Eamon. The geometry is clean and the model is *very* true to the concept. Vaaish and I were discussing the models and, for better or for worse, we came to the conclusion that we like the configuration of Fidel__'s take on the concept better. It looks more fleet footed and predatory. I was wondering if you would care to work your magic on Fidel__'s model. Fidel__ admits that the geometry isn't as clean as yours, but we do like the shape better. Fidel__ has roughed in some detail but it lacks claws, etc. If you decide to take it up, we like your work in the claws; the optimum outcome would be for you to keep the splayed toes of Fidel__'s monster but to put your claws on them, and to detail up the model as you see fit. Thanks fux0r666 for your really good feedback. Well this is an overhaul of the model... it now has 1513 polys (down from 2054 polys) and hopefully has a look that everyone will like... (but I am still open to all ideas) -Eamon http://lightshift.theblood.net/pictures/Raptor2.jpg Link to comment Share on other sites More sharing options...
fux0r666 Posted February 10, 2005 Report Share Posted February 10, 2005 This owl-like body intruiges me. What was your headspace when you decided to take the design in this direction? One issue I think is the shape of the head from above. It looks pinched to me. Link to comment Share on other sites More sharing options...
eamon Posted February 10, 2005 Report Share Posted February 10, 2005 (edited) This owl-like body intruiges me. What was your headspace when you decided to take the design in this direction? One issue I think is the shape of the head from above. It looks pinched to me. Headspace? Are you asking me or Fidel__? He is the one that designed the look of the body and head. His model had a pinched head and I did not change the look at all.  What I have done is lower the poly count, add symmetry, make the new feet, and remove the pipes on the back of the legs. I know this may sound strange but did you get to look at Fidel__'s model from all sides? If you did not get to, I can send you any view of his original model that you would like. -Eamon Edit: Now as for the sizing of this monster... here is what you get when put the model with no streching into the 1m-x-1m-x-2.5m box. (the alien is just for size comparison and stands 1.5m* tall) *average human hight XX http://www.theblood.net/lightshift/pictures/reaver2.jpghttp://www.theblood.net/lightshift/pictures/reaver3.jpg Edited February 10, 2005 by eamon Link to comment Share on other sites More sharing options...
fux0r666 Posted February 10, 2005 Report Share Posted February 10, 2005 This owl-like body intruiges me. What was your headspace when you decided to take the design in this direction? One issue I think is the shape of the head from above. It looks pinched to me. What program are you using? I think there is a problem with the importation. Screenshots of what the model should look like are located up the page. Link to comment Share on other sites More sharing options...
j'ordos Posted February 10, 2005 Report Share Posted February 10, 2005 I think it's Lightwave, but it's been a while since last time that I used that so I'm not 100% sure.What looks strange to me are the straight legs in front view, I think it would be better to pronounce the knee joint a little more, so the leg is not the same width over almost the entire lenght. Link to comment Share on other sites More sharing options...
eamon Posted February 10, 2005 Report Share Posted February 10, 2005 What program are you using? I think there is a problem with the importation. Screenshots of what the model should look like are located up the page. I am using Lightwave 3d v7 and have not had a broblem importing in the past. I would check with Fidel__ to see if his model had that look before.  -Eamon Link to comment Share on other sites More sharing options...
mikker Posted February 11, 2005 Report Share Posted February 11, 2005 Kinda reminds me of the Zaurus in Breath of Fire 4. http://membres.lycos.fr/zonerpg/Images/Test/Psx/bof4_17.jpg http://membres.lycos.fr/zonerpg/Images/Test/Psx/bof4-11.jpg Link to comment Share on other sites More sharing options...
kafros Posted February 11, 2005 Report Share Posted February 11, 2005 Shouldn't the reaper be ~2.1M Tall? Link to comment Share on other sites More sharing options...
mikker Posted February 11, 2005 Report Share Posted February 11, 2005 yeah - it should be twice the size. Link to comment Share on other sites More sharing options...
eamon Posted February 13, 2005 Report Share Posted February 13, 2005 I will do up a new size comparison sometime tomarrow. I have had some long hours at work the last few days  it will fit in a 2X2 block... thanks for the feedback  XXXX -Eamon Link to comment Share on other sites More sharing options...
fux0r666 Posted February 13, 2005 Report Share Posted February 13, 2005 Something will always remind someone of something else. What is the purpose of bringing this to our attention? Link to comment Share on other sites More sharing options...
eamon Posted February 14, 2005 Report Share Posted February 14, 2005 Well I still have not tried to "stuff/strech" the model into the box just size it into it. It stands 2.1m tall. and as you can see the tail exstends out of the box a little bit... I think if I make it 2m tall and bend the tail down more I can get it to fit... Feedback? and also feedback on the model (here are several views)Pictures the attached Zip has the raptor as it is now (not sized) in the following formats:.3ds.obj.mesh.ms3d.XSI -Eamon http://www.theblood.net/lightshift/pictures/reaver4.jpgRaptor.zip Link to comment Share on other sites More sharing options...
Vaaish Posted February 15, 2005 Author Report Share Posted February 15, 2005 Starting to take shape nicely. the feet are looking much better now. it still looks a little odd on the insides of the feet and how they attach to the legs but good job. Link to comment Share on other sites More sharing options...
red knight Posted February 15, 2005 Report Share Posted February 15, 2005 Try to make it fit. 10 to 20 cm less is good enough... The most pressing issue is the 2x2 constrain, not the highness (even if it can become an issue later ). If you have to constrain it, PM Azrael about the change to the CTD. GreetingsRed Knight Link to comment Share on other sites More sharing options...
Darkhomb Posted December 13, 2005 Report Share Posted December 13, 2005 (edited) Well I'm trying to help out alittle but as I told Vaaish I don't want to assign myself to anything yet cuz even though i have some time at the moment it can change, but i've been trying to help with uvmaping some of the models. heres my progress on this so far. Edited December 13, 2005 by Darkhomb Link to comment Share on other sites More sharing options...
fux0r666 Posted December 13, 2005 Report Share Posted December 13, 2005 looks pretty sweet! Link to comment Share on other sites More sharing options...
Darkhomb Posted December 13, 2005 Report Share Posted December 13, 2005 (edited) I would like to ask you since I'm new on this, how much stretching is tolerable and where would the seams be good for this? right now there down the middle cuz i don't think its going to be a dead on view and the sides would get more but not sure whats best. Edited December 13, 2005 by Darkhomb Link to comment Share on other sites More sharing options...
Vaaish Posted December 13, 2005 Author Report Share Posted December 13, 2005 what you have looks pretty good. There appears to be some minor seam issues where the front of the lg joins the body but for the most part it appears pretty good. Â To answer your question... as little stretching as possible the the less visable teh area or the less detail an area has the more stretching is tollerable. Link to comment Share on other sites More sharing options...
Darkhomb Posted December 13, 2005 Report Share Posted December 13, 2005 (edited) Yeah the seams I will work on. I finished getting the stretching perfect and mapped. I'm done for the night though. Still some more to stitch together but alot is done. I worked on this thing all day. I think its not bad for my first time. Edited December 13, 2005 by Darkhomb Link to comment Share on other sites More sharing options...
Darkhomb Posted December 14, 2005 Report Share Posted December 14, 2005 Ok well I wasn't trying to modify the model but there is an open edge on both feet, if you look at the pictures, i then divided the bottom one and welded the vertex together to close it so I can finish stitching. Is this ok? Link to comment Share on other sites More sharing options...
Darkhomb Posted December 14, 2005 Report Share Posted December 14, 2005 (edited) Ok well I went ahead and fixed a couple more open edges and pretty much done until you tell me how you want me to change it for the seams. I want to redo the feet because there are small faces I do not see and i want both ft to match and right now the top and bottom are uneven for left and right. Edited December 14, 2005 by Darkhomb Link to comment Share on other sites More sharing options...
Vaaish Posted December 14, 2005 Author Report Share Posted December 14, 2005 every thing looks good so far. One way of matching the UV's on the feet would be to cut the model in half and mirror it. that should give you matching UV's. Also, once you get finished tweaking you need to arrange the unwrapped UV's into a square so that you maximize the amout of space used in a 512x512 area. You can scale portions of the uv's up or down depending on how important they are. Eg. you might scale the uvs on the top of the body up in this case since they will be the most visible. THis will give their textures a higher res appearance since it uses more of the texture space than say the bottom of the foot. Link to comment Share on other sites More sharing options...
Darkhomb Posted December 14, 2005 Report Share Posted December 14, 2005 (edited) Ok, but as for closing the edges was ok? as for the feet, instead of mirroring them, I made them the same so they can over lap each other and you only have to paint one anyway, is this ok?attached sample for feet. *Fixed some spelling issues Edited December 14, 2005 by Darkhomb Link to comment Share on other sites More sharing options...
Darkhomb Posted December 14, 2005 Report Share Posted December 14, 2005 Kinda like this? Link to comment Share on other sites More sharing options...
Vaaish Posted December 14, 2005 Author Report Share Posted December 14, 2005 yeah kinda like that.... I think you can play tetris a bit more and fit it more tightly. On the feet are there separate sections for the top and bottom of the feet and what are the tiny little parts on teh UV map? Bascially what you do is rotate and scale the two largest sections of the map so that they fit in and then rotate and scale the rest of the pieces so that the fit like a jigsaw puzzle. Link to comment Share on other sites More sharing options...
Darkhomb Posted December 14, 2005 Report Share Posted December 14, 2005 Those tiny sections are the 2 front teeth and whatever the other 4 teeth like things are on the left and right inside of the mouth. the feet are broken into top and bottom. I could disconnect the "claws" and make them separate if it would be better Link to comment Share on other sites More sharing options...
Vaaish Posted December 14, 2005 Author Report Share Posted December 14, 2005 Those tiny sections are the 2 front teeth and whatever the other 4 teeth like things are on the left and right inside of the mouth. the feet are broken into top and bottom. I could disconnect the "claws" and make them separate if it would be better no as long as they are broken into top and bottem it'll be fine. To help unify the map, combine all the teeth into a single item (don't merge the seams, just put them on top of each other and matchthe shape) so that we don't have to paint the texture for each individual tooth, just a single one for all of them. Link to comment Share on other sites More sharing options...
Darkhomb Posted December 14, 2005 Report Share Posted December 14, 2005 I can do that, Same as I will for the feet. It will be 2 sets though because the front teeth are diffrent but it will work. I just wanted to lay all the uvs out to show you. Link to comment Share on other sites More sharing options...
Recommended Posts